Skip to Main Content

DAEX32EP-4 Thruster 32mm Exciter 40W 4 Ohm

Quick Overview

Turn even large, rigid surfaces into speakers with the Dayton Audio DAEX32EP-4 Thruster exciter!

Product Highlights

  • Robust, heavy-duty design with a 32 mm voice coil attached to a steel spider
  • Pre-applied 3M™ VHB™ adhesive for quick, secure installation
  • Rare-earth neodymium motor and a proprietary two-layer voice coil
  • 4 ohms impedance for use with small, Class D amplifiers
  • 40 watt RMS power handling for high output

Product Manuals / Spec Sheets / Downloads

Dayton Audio DAEX32EP-4 Specification Sheet

Dayton Audios DAEX32EP-4 Thruster exciter is built to turn large, thick, rigid surfaces into speakers. The 32 mm voice coil is attached to a steel spider for maximum restoring force when large amounts of power are applied, making it perfect for large glass panes, furniture, and surfaces that would normally resist the effects of an exciter.

A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small Class D audio amplifiers, without sacrificing total output.

To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied to the main body ... just peel and stick! Two male spade quick-disconnect terminals are built onto the main body for quick electrical connection.

Note: An exciters frequency response and sensitivity are completely dependent on the exciters designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound.

Adhesive dimensions: 41.75 mm (outside diameter), 21.75 (inside diameter)

To understand more about exciter technology, here is a link to the Exciters Buyers Guide .

Speaker Series Exciters
Model Number DAEX32EP-4
List Price $23.99
Color Black
Unit of Measure Each
UPC 848791000928
Warranty - Parts 5 Years
Warranty - Labor 5 Years
Product Shipping Weight (lbs.) 0.3
Speaker Type Exciter
Power Handling (RMS) 40 watts
Power Handling (max) --
Continuous Program Power --
Impedance 4 ohms
Sensitivity --
Frequency Response --
Voice Coil Diameter 32 mm
Magnet Weight --
DC Resistance (Re) 3.3 ohms
Voice Coil Inductance (Le) 0.21 mH @ 1 kHz
Resonant Frequency (Fs) 395 Hz
Mechanical Q (Qms) --
Electromagnetic Q (Qes) --
Total Q (Qts) 1.38
Diaphragm Mass Inc. Airload (Mms) 5.4 g
Moving Mass Of Diaphragm (Mmd) --
Mechanical Compliance of Suspension (Cms) 0.08 mm/N
Surface Area Of Cone (Sd) --
Volume of Displacement (Vd) --
BL Product (BL) 4.2 Tm
Compliance Equivalent Volume (Vas) --
Maximum Linear Excursion (Xmax) --
Drivers Mechanical Losses (Rms) --
Entry / Exit Diameter --
Surround Material --
Voice Coil Wire Material --
Voice Coil Former --
Basket/Frame Material --
Magnet Material --
Overall Outside Diameter 60 mm dia.
Overall Depth 23 mm
Baffle Cutout Diameter --
Mounting Hole Diameter --
Bolt Circle Diameter --
Product Weight --
Loading...