DAEX25TP-4 Tripod Feet 25mm Exciter 20W 4 Ohm

Quick Overview

For turning larger surfaces into speakers, and more bass output, Dayton Audios DAEX25TP-4 features three extended arms. Cooling vents draw air across the propietary voice coil for higher power handling.

Product Highlights

  • Unique, three arm design for exciting a large surface
  • Pre-applied 3M™ VHB™ adhesive for quick, secure installation
  • Rare-earth neodymium motor and a proprietary voice coil
  • 4 ohms impedance for use with small, Class D amplifiers
  • 10 watt RMS power handling for high output

Product Manuals / Spec Sheets / Downloads

Dayton Audio DAEX25TP-4 Specification Sheet

Buying Options

Dayton Audios DAEX25TP-4 tripod exciter is built with three arms that extend out from the main exciter body, which allows this exciter to transfer sound to a much larger surface for lower frequency response extension (more bass).

A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The 1" voice coil, and cooling vents, allows for more input power for higher output applications while maintaining a slim-line form factor.

To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied to the main body, and the three arms ... just peel and stick! Two PCB solder points keep installation and wiring as compact as possible.

Note: An exciters frequency response and sensitivity are completely dependent on the exciters designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound.

To understand more about exciter technology, here is a link to the Exciters Buyers Guide .

Speaker Series Exciters
Model Number DAEX25TP-4
Color Black
Unit of Measure Each
UPC 848791000935
Warranty - Parts 5 Years
Warranty - Labor 5 Years
Product Shipping Weight (lbs.) 0.2
Speaker Type Exciter
Power Handling (RMS) 20 watts
Power Handling (max) --
Continuous Program Power --
Impedance 4 ohms
Sensitivity --
Frequency Response --
Voice Coil Diameter 25 mm
Magnet Weight --
DC Resistance (Re) 4.2 ohms
Voice Coil Inductance (Le) 0.10 mH @ 1 kHz
Resonant Frequency (Fs) 233 Hz
Mechanical Q (Qms) --
Electromagnetic Q (Qes) --
Total Q (Qts) 0.74
Diaphragm Mass Inc. Airload (Mms) 1.75 g
Moving Mass Of Diaphragm (Mmd) --
Mechanical Compliance of Suspension (Cms) 0.0003 mm/N
Surface Area Of Cone (Sd) --
Volume of Displacement (Vd) --
BL Product (BL) 3.86 Tm
Compliance Equivalent Volume (Vas) --
Maximum Linear Excursion (Xmax) --
Drivers Mechanical Losses (Rms) --
Entry / Exit Diameter --
Surround Material --
Voice Coil Wire Material --
Voice Coil Former --
Basket/Frame Material --
Magnet Material --
Overall Outside Diameter 88.71 mm dia.
Overall Depth 21 mm
Baffle Cutout Diameter --
Mounting Hole Diameter --
Bolt Circle Diameter --
Product Weight --
Loading...