| Products | ||
| Crossovers & Components | ||
| Crossovers | ||
| Capacitors | ||
| Resistors | ||
2-Way Crossovers  |
The Dayton Loudspeaker line of 2-way crossovers were designed using a second order (12dB) Linkwitz-Riley alignment. Dayton metallized polypropylene capacitors are used in both the high and low pass sections. 18 gauge inductors were used to keep DC resistance to a minimum. A unique design feature of the low pass section allows use of 4 or 8 ohm woofers, perfect for building D'Appolito style or multi woofer 2-way systems. The high pass crossover frequency is rated for an 8 ohm load. All components are glued or fastened down to eliminate buzzing and vibrations. The high quality blue PC board uses a back plate for added rigidity and eyelet holes for easy mounting. Available in a variety of crossover points. Specifications:
|
|||||||||||
3-Way Crossovers  |
These 3-way, 2nd order (12dB) crossovers were designed with a 3 octave spread between crossover points. Dayton metallized polypropylene capacitors are used in critical midrange and tweeter signal paths. 18 gauge inductors were used to keep DC resistance to a minimum. A unique design feature of the low pass section allows use of 4 or 8 ohm woofers, perfect for building a multi woofer system. The midrange and high pass sections are rated for an 8 ohm load. All components are glued or fastened down to eliminate buzzing and vibrations. The high quality blue PC board uses a back plate for added rigidity and eyelet holes for easy mounting. Available in a variety of crossover points. Specifications:
|
|||||||||||