| Products | ||
| Finished Speaker Cabinets | ||
| Two-Way Cabinets | ||
| MTM Cabinets | ||
| Subwoofer Cabinets | ||
| In-Wall Mounting Systems | ||
MTM Cabinets  |
If you have ever wanted to create a loudspeaker without investing the time and money building from scratch, these cabinets are the answer. You can completely eliminate the time-consuming and messy steps of cutting wood, cabinet assembly, gluing veneer, and finishing. By using these pre-fi nished cabinets, you guarantee superior results every time. Constructed out of MDF with real wood veneers, the quality of these cabinets is outstanding. Each cabinet has 3/4" MDF side and back panels with a 3/4" MDF "shelf" brace running vertically up the sides and across the top and bottom. The baffle is 1" MDF with a black satin finish and rabbeted construction. The rear of the cabinet features two 1/4" holes allowing the installation of our knock-in binding posts. The overall cabinet is extremely rigid and solid, with minimal panel resonance. The entire cabinet (including the rear) is covered in premium veneers with a butter-smooth finish. The gloss black cabinets feature a piano-quality finish that is extremely glossy and refl ective. The Beech cabinets feature a very light-colored, tight-grained wood veneer with a semi-gloss finish, making them fit into any contemporary decor. The Cherry finish is very rich with a relatively strong, wide grain and a semi-gloss finish, making them very elegant. It is important to note that these cabinets use real wood veneers, so some variations in grain and color will naturally occur between cabinets. One of the most innovative features is the exclusive baffle Replacement and EXchange (B-REX) system, which allows the front baffle to be easily removed for prototyping and construction. Concealed under the holes for the grill guides are 4 machine screws and matching T-nuts that secure the baffle to the cabinet. This re-installable approach works great particularly for making initial driver cutouts. Thanks to the B-REX system, if you are uncertain whether your speakers are complete, the machine screws by themselves can be used to hold the baffle in place. Once you are ready to finalize the design, they then act as clamps to hold the baffle in place while your glue is setting. Blank baffl es are available separately, allowing further possibilities in terms of using a single cabinet for multiple pairs of drivers. As you can see, the versatility offered by the BREX system is unmatched in any other pre-fi nished cabinet! These finished cabinets come complete with baffle , hardware, grill guides, and grills. All you need is binding posts, crossover parts, damping materials, and your drivers to have a complete system that will rival the looks of the most lavish audiophile speakers. .75 Cu. Ft. Dimensions
|
||||||||||||||||||||||