More Views

RSS265HO-44 10" Reference HO DVC Subwoofer 2 Ohm

Quick Overview

The RSS265HO-44 10" High Output Reference Subwoofer from Dayton Audio is designed for high power handling and extremely low distortion. A small enclosure requirement allows it to be used in car audio and space limited home audio applications.

Product Highlights

• Dual 4 ohm voice coils for many wiring options
• Extensively vented motor eliminates compression and allows quiet excursion
• Extra-thick black anodized aluminum cone for maximum rigidity
• Triple shorting-ring motor for ultra-low distortion
• Parameters optimized for small enclosures
• Highest quality materials throughout for long-lasting performance

Product Manuals / Spec Sheets / Downloads

Product Description

Dayton Audio's 10" RSS265HO-44 High Output Reference Series subwoofer is purpose-built for moving lots of air, extreme power handling, extremely low distortion... and it does it all with an extremely small enclosure requirement! The minimum airspace optimization of this driver makes it perfect for car audio automotive applications and limited space home audio applications.

To minimize distortion, three copper short-circuit paths are built into the motor. This reduces second, third, and intermodulation distortion to levels only attained previously by expensive, exotic subwoofers. A side benefit is reduced energy storage and inductance, making the RSS265HO-44 a very musical subwoofer. In fact, frequency response remains very flat up to 500 Hz.

Additional features include: a heavy gauge black anodized aluminum cone that resists deformation from extreme air pressure levels found inside of small sealed enclosures, a fully ventilated motor for reduced power compression, a rigid cast aluminum frame for structural integrity, and a tough rubber surround that won't wear down over years of use. Dual 4-ohm voice coils allow for a wide array of wiring options.

As with all Dayton Audio subwoofers, you receive a full 5-year warranty. Designed and engineered in the U.S.A.

OPTIMUM CABINET SIZE *

Sealed Volume 0.55 ft.³
Sealed F3 46 Hz
Vented Volume 1.5 ft.³
Vented F3 22 Hz
* Enclosure volume/F3s based on BassBox "optimum" calculations

Product Details

Speaker Series Reference Series
Model Number RSS265HO-44
List Price $189.99
Color Black
Unit of Measure Each
UPC 848791000324
Warranty - Parts 5 Years
Warranty - Labor 5 Years
Product Shipping Weight (lbs.) 17.2000
Speaker Type Subwoofer
Nominal Diameter 10"
Power Handling (RMS) 600 watts
Power Handling (max) 1200 watts
Continuous Program Power --
Impedance 2 ohms
Sensitivity 90.5 dB @ 2.83V/1m
Frequency Response 25 - 600 Hz
Voice Coil Diameter 65.5 mm
Magnet Weight --
DC Resistance (Re) 1.6 ohms
Voice Coil Inductance (Le) 0.77 mH @ 1 kHz
Resonant Frequency (Fs) 27.6 Hz
Mechanical Q (Qms) 4.42
Electromagnetic Q (Qes) 0.50
Total Q (Qts) 0.45
Diaphragm Mass Inc. Airload (Mms) 161g
Moving Mass Of Diaphragm (Mmd) --
Mechanical Compliance of Suspension (Cms) 0.21 mm/N
Surface Area Of Cone (Sd) 352.3 cm²
Volume of Displacement (Vd) 467.0 cm³
BL Product (BL) 9.39 Tm
Compliance Equivalent Volume (Vas) 34.8 liters
Maximum Linear Excursion (Xmax) 13.25 mm
Driver's Mechanical Losses (Rms) --
Cone / Diaphragm Material Black Anodized Aluminum Cone
Entry / Exit Diameter --
Surround Material Rubber
Voice Coil Wire Material --
Voice Coil Former --
Dual Voice Coil Yes
Basket/Frame Material Cast Aluminum
Magnet Material --
Overall Outside Diameter 266 mm
Overall Depth 136.5 mm
Baffle Cutout Diameter 235 mm
# Mounting Holes 6
Mounting Hole Diameter --
Bolt Circle Diameter --
Product Weight --