Two common or BUS inputs feed audio signals from standard line-level audio sources to any or all channels. Each of the twelve channels has its own dedicated input and independent level adjustment to provide further flexibility. By simply flipping a single switch, two channels can be bridged to increase the total power output for that zone. This is helpful when extra power is needed in certain areas.
The MA1240a's manual, automatic on/off, or triggered 12V input turn-on modes facilitate easy integration into automated systems. For quick and easy troubleshooting of the system, each pair of channels or zones has a bi-color LED to indicate its operational status.
*NOTE: See setup addendum when using in-wall volume controls. You can find this resource under 'Product Manuals' listed above.
|Unit of Measure||Each|
|Warranty - Parts||5 Years|
|Warranty - Labor||5 Years|
|Product Shipping Weight (lbs.)||38.0000|
|Amplifier Type||Multi-Zone Amplifiers|
|Power Output||40 Watts per channel RMS at 8 ohms 80 Watts per channel RMS at 8 ohms (Bridged)|
|Power Output (RMS @ 70V) Range||--|
|Output Connectors||Phoenix, RCA|
|Output Types||4 ohms, 8 ohms|
|Input Impedance||18K ohm|
|Signal-to-Noise Ratio||105 dB A-weighted|
|THD @ Rated Power||.005% THD 20 Hz-20 kHz @ 30W (8 ohm) .010% THD 20 Hz-20 kHz @ 80W (8 ohm) (Bridged)|
|Low Pass Adjustment||--|
|Frequency Response||5 Hz to 72 kHz|
|Voltage Requirement||115/230 VAC, 60/50 Hz|
|Stand-by Power Rating||115V, 0.264W|
|Special Features||Multi-stage protection circuitryRack mountableIndependent channel gain controls12 channels(6 stereo zones)Individual channel inputs (plus BUS 1 & 2)|