Product Description
These DVC subwoofers are the most versatile drivers in the Dayton Loudspeaker line up. They were engineered to provide very good performance in sealed, vented, bandpass or even transmission line designs. The dual 8 ohm voice coils allow for use in a variety of applications and wiring configurations.
Each driver features a heavy gauge stamped steel frame, super stiff Kevlar impregnated paper cone, thick foam surround, flat progressive spider, vented pole piece, dual high power Kapton voice coils, heavy duty braided tinsel leads, and rubber magnet cover. Made in the U.S.A. 5 Year Limited Warranty.
PRODUCT DETAIL |
|
|---|---|
| Speaker Series | DVC |
| Model Number | DVC385-88 |
| List Price | $207.99 |
| Unit of Measure | Each |
| UPC | 844632000072 |
| Warranty - Parts | 5 Years |
| Warranty - Labor | 5 Years |
| Product Shipping Weight | 19.4000 |
PRODUCT SPECIFICATIONS |
|
| Speaker Type | Subwoofer |
| Nominal Diameter | 15" |
| Power Handling (RMS) | 350 watts |
| Power Handling (max) | 600 watts |
| Impedance | 4 ohms |
| Sensitivity | 90 dB 2.83V/1m |
| Frequency Response | 20 - 450 Hz |
| Voice Coil Diameter | 2" |
| Magnet Weight | 112 oz. |
THIELE-SMALL PARAMETERS |
|
| DC Resistance (Re) | 2.8 ohms |
| Voice Coil Inductance (Le) | 1.82 mH |
| Resonant Frequency (Fs) | 19.0 Hz |
| Mechanical Q (Qms) | 8.66 |
| Electromagnetic Q (Qes) | 0.38 |
| Total Q (Qts) | 0.36 |
| Diaphragm Mass Inc. Airload (Mms) | 297.10 g |
| Mechanical Compliance of Suspension (Cms) | 0.24 mm/N |
| Surface Area Of Cone (Sd) | 829.6 cm2 |
| Volume of Displacement (Vd) | 1,252.7 cm3 |
| BL Product (BL) | 16.00 Tm |
| Compliance Equivalent Volume (Vas) | 8.20 cu. ft. |
| Maximum Linear Excursion (Xmax) | 15.1 mm |
MATERIALS OF CONSTRUCTION |
|
| Cone / Diaphragm Material | Kevlar Impregnated Paper Cone |
| Surround Material | Thick Foam |
| Voice Coil Former | Kapton |
| Dual Voice Coil | Yes |
| Basket/Frame Material | Steel |
| Shielded | No |
MOUNTING INFORMATION |
|
| Overall Outside Diameter | 15.125" |
| Overall Depth | 7.375" |
| Baffle Cutout Diameter | 13.875" |
| # Mounting Holes | 8 |