ND16FA-6 5/8" Neodymium Dome Tweeter

Quick Overview

Don't let the low price fool you! This versatile tweeter is a huge step above the average "budget" tweeter.

Product Highlights

• Unique front pressfit, flush-mount design
• Center-to-center spacing as low as 1-3/8"
• Extended response with superior off-axis dispersion
• Compact neodymium motor is effectively self-shielded
• Ferrofluid enhances power handling and helps damp resonance

Product Manuals / Spec Sheets / Downloads

ND16FA-6 5/8" Neodymium Dome Tweeter

Click thumnail to view
Hover over main image to zoom
Click main image to view full image

Product Description

Don't let the low price fool you! This versatile tweeter is a huge step above the average "budget" tweeter. Conceived with line array thoughts in mind, it is finally possible to achieve the inter-driver spacing needed to minimize comb filtering out to nearly 20 kHz. But their uses don't stop at line arrays-- they have the sensitivity, smoothness, and power handling to individually do a two-way with most small woofers. Give them a try for your next budget or micro speaker-- you will be pleasantly surprised!

PRODUCT DETAIL


Speaker Series Neo-Balance
Model Number ND16FA-6
List Price $17.99
Unit of Measure Each
UPC 844632056499
Warranty - Parts 5 Years
Warranty - Labor 5 Years
Product Shipping Weight 0.0800

PRODUCT SPECIFICATIONS


Speaker Type Tweeter
Nominal Diameter .625"
Power Handling (RMS) 10 watts
Power Handling (max) 20 watts
Impedance 6 ohms
Sensitivity 90.5 dB 2.83V/1m
Frequency Response 3,500 - 27,000 Hz
Voice Coil Diameter .625"

THIELE-SMALL PARAMETERS


DC Resistance (Re) 5.0 ohms
Voice Coil Inductance (Le) 0.05 mH
Resonant Frequency (Fs) 2,283.0 Hz
Mechanical Q (Qms) 2.42
Electromagnetic Q (Qes) 3.1
Total Q (Qts) 1.36
Surface Area Of Cone (Sd) 2.0 cm2

MATERIALS OF CONSTRUCTION


Cone / Diaphragm Material Textile Soft Dome
Dual Voice Coil No
Magnet Material Neodymium
Shielded No

MOUNTING INFORMATION


Overall Outside Diameter 1.250"
Overall Depth .625"
Baffle Cutout Diameter 1.250"
Mounting Hole Diameter 1.25"