APA102 Class D Stereo 60 WPC Amplifier Auto On

Quick Overview

Connect with the Dayton Audio APA102 amplifier and enjoy the convenience of auto-on and auto-source switching technology that makes playing your favorite music a breeze. Use this affordable, versatile amp when more power is needed in a multi-zone system, or in a powerful, audiophile-grade stereo hi-fi setup.

Product Highlights

• Delivers precise, uncolored audio power
• Convenient signal sensing power on and trigger modes
• Dual stereo RCA line level inputs switch sources automatically
• RCA stereo looping outputs to feed additional zone amplifier(s)
• A/B speaker selector simplifies connectivity
• 5-way binding posts on both sets of L/R speaker outputs

Product Manuals / Spec Sheets / Downloads

Product Description

The Dayton Audio APA102 high fidelity power amplifier switches sources and powers on (in auto-on mode) automatically when a source signal is detected. Two-sources, two-channels, and Class D topology make Dayton Audio's APA102 amplifier the heavyweight in its class. The APA102 features two pairs of RCA line level inputs and a loop-out from the second source to feed additional zones, receivers, or other devices. Use the APA102 for additional power when connected to a multi-zone audio system, or by itself to power a stereo speaker system.

The APA102 is rated at 75 watts RMS per channel into 4 ohms, and 60 watts RMS per channel into 8 ohms. In bridged mono mode, both amplifier channels are combined for high-power monaural output. The amplifier is rated at 160 watts RMS into a single 8 ohm load when bridged. Each amplifier output channel incorporates robust protection circuitry for reliability and safety.

Specifications: • Output power: 60 watts RMS @ 8 ohms, 75 watts RMS @ 4 ohms, 160 watts RMS @ 8 ohms (minimum impedance) bridged mono • Total harmonic distortion: <1.0% @ 1 kHz • Signal to noise ratio: 100 dB, A-weighted • Frequency response: 10-30,000 Hz +0.0 dB/-3.0 dB • Input sensitivity: 700 mV • Power: 120 VAC, 60 Hz, 4.2A • Dimensions: 16.9" W x 7.65" D x 2.15" H.

Product Details

Model Number APA102
List Price $149.00
Color Black
Unit of Measure Each
UPC 848791003806
Warranty - Parts 5 Years
Warranty - Labor 5 Years
Product Height 2.15"
Product Width 16.9"
Product Length --
Product Depth 7.65"
Product Shipping Weight (lbs.) 6.2000
Amplifier Type Power Amplifiers
Power Output 60 watts RMS @ 8 ohms, 75 watts RMS @ 4 ohms, 160 watts RMS @ 8 ohms (minimum impedance) bridged mono
Output Channels 2
Output Connectors Banana Jacks, RCA
Output Types 4 ohms, 8 ohms
Inputs 2
Input Connectors RCA
Input Impedance --
Signal-to-Noise Ratio 100 dB, A-weighted
THD @ Rated Power <1.0% @ 1 kHz
Parametric EQ --
Phase Adjustment --
Low-pass Crossover --
Low Pass Adjustment --
Dynamic Range --
Frequency Response 10 - 30,000 Hz +0.0 dB/-3.0 dB
Efficiency --
Gain --
Bass Boost --
Voltage Requirement --
Auto-on Sensitivity Yes
Stand-by Power Rating --
Special Features --