Speaker output connections are high-current banana plug receptacles spaced on 3/4" centers and compatible with standard double banana plugs (sold separately). High quality screw-on banana plugs that will accept 10 to 18 AWG wire are included. The DTA-100a also doubles as a high fidelity headphone amplifier that will drive any headphone easily, and delivers colossal sound stage from 20-20,000 Hz with a signal-to-noise ratio of 103 dB (A-weighted). The 1/4" stereo jack simplifies connection of larger home and studio style headphones. An adapter is also provided so smaller 3.5 mm personal-style headphones can be used. The amplifier comes complete with a world compatible power supply and its associated connectors.
Note: Do not use with speakers that are lower than 8 ohms nominal impedance. This amplifier is not bridgeable.
Check out this DTA-100a review!
|Unit of Measure||Each|
|Warranty - Parts||1 Year|
|Warranty - Labor||1 Year|
|Product Shipping Weight (lbs.)||2.7500|
|Amplifier Type||Mini Amplifiers|
|Power Output||50 watts RMS x 2 into 8 ohms|
|Output Connectors||Banana Jacks|
|Output Types||8 ohms|
|Input Connectors||3.5mm, RCA|
|Input Impedance||2 K ohm ±5%|
|Signal-to-Noise Ratio||103 dB A-weighted|
|THD @ Rated Power||<0.01% @30W <5.0% @50W|
|Dynamic Range||>100 dB|
|Frequency Response||20 Hz to 20,000 Hz|
|Voltage Requirement||World compatible 24VDC @ 5A center pin positive|
|Special Features||Automatic switching 3.5mm input jack¼" Headphone jack allows the unit to double as a high fidelity headphone amplifier|